Dymonic FC is a durable, flexible, sealant that offers excellent performance in moving joints and exhibits tenacious adhesion once fully cured. Typical applications for Dymonic FC include expansion and control joints, precast concrete panel joints, perimeter caulking (windows, door, panels), EIFS, aluminum, masonry and vinyl siding.

High Performance, High Movement Single-Component, Polyurethane Sealant. Dymonic® 100 is a high performance, medium-modulus, low-VOC, UV stable, non-sag polyurethane sealant.

Single-Component, Acetoxy Silicone Sealant. Tremsil 200 is a single-component, acetoxy silicone sealant. Tremsil 200 cures to a flexible rubber when exposed to moisture present in the air.

Tremsil 400 is a high-performance, medium-modulus, onecomponent, neutral cure silicone sealant.

Tremsil 600 is ideal for use as an in-plant glazing sealant for applications that include, back-bedding, cap, heel and toe beads, and sash joinery. Tremsil 600 is compatible to most common porous and non-porous building components.

Tremco 830 is a thermo-plastic sealant that provides a high performance, flexible seal. Tremco 830 can be used for face bedding and cap bead in glazing application and sealing of mitre joints in window profiles.

Tremflex 834 can be used for general purpose interior and exterior caulking and as a back bedding glazing compound. It is also highly recommended as an acoustical seal in the construction of interior walls, ceilings and floors. It is also suitable for use on vinyl, aluminum and wood siding as well as on bathroom and kitchen fixtures.

Spec 1 Ultra Low Modulus is formulated for expansion, control, lap joints, and EIFS applications. It also acts as an adhesive used in conjunction with Spectrem Simple Seal. Simple Seal is used as a bridge seal in both new construction and restoration work.

Spectrem 2 is a medium-modulus, one-part, high-performance, neutral-cure silicone sealant, ideal for a variety of perimeter caulking and glazing applications.

Spectrem 3 Anodized Aluminum is a general-purpose, low-modulus, high-performance, one-part, neutral-cure, non-staining, low dirt pick-up, construction-grade silicone sealant. Spectrem 3 has a patented chemistry that has been specifically formulated to seal porous stone, EIFS, metal panels, masonry and pre-cast concrete joints.

Tremco Acoustical Sealant is used for sealing joints in applications such as curtainwall joints, metal panel joining, bedding thresholds, secondary glazing seals, and areas where a seal is required against Tremco Neoprene or EPDM gaskets.

Gutter Seal is a one-part, high quality blend of synthetic rubber and resin. It exhibits excellent elastomeric properties while maintaining superior adhesion under ponded water conditions. Gutter Seal has been specifically designed for use in gutter and rain-wear applications and is ideally suited for metal to metal and metal to plastic joinery. Commonly found in and around the eavestrough.

Vulkem 116 is a one-part, moisture-curing, gun-grade polyurethane sealant. It is durable, flexible, and offers excellent performance in dynamic joints.

TremPro JS-773 is a high-solids, non-skinning, non-drying, synthetic, butyl elastomer sealant. It exhibits excellent adhesion to a variety of metals and metal finishes including hot-dip galvanized steel, Galvalume, Kynar 500, stainless steel, polyvinylidene fluoride (PVDF), aluminum and fiberglass.

TREMstop Acrylic is a gunnable acrylic latex sealant designed for use in firestop applications, including both joints and through-penetrations. TREMstop Acrylic is for use on metal pipe, plastic pipe, insulated pipe, cables, cable trays, ducts, static joints and dynamic joints in fire-rated concrete, wood floor/ceiling and gypsum wall assemblies. TREMstop Acrylic can also be used on sound rated assemblies.

TREMstop IA+ is a high-performance, single-component, waterbased, intumescent firestop sealant that will expand to fill the voids left when combustible materials burn and deteriorate in a fire. TREMstop IA+ is tested to treat 95 percent of the common applications found on a job site, including metal pipe, plastic pipe, insulated pipe, cables, ducts and multiple penetrations.

Tremco Butyl Sealant is formulated from a blend of butyl rubber and polyisobutylene to form an economical, flexible, exterior-grade weather-resistant sealant.