Formulated to seal outdoor joints between two perpendicular surfaces exposed to thermal movement around door and window frames and sidings. The performance of SUPRA EXPERT, its ease of use as well as its remarkable choice of colours make it the ideal choice for professionals in construction and renovation applications.

MULCO SUPRA ELITE™ sealant is the first of its kind for PPG Industries, that is a low-volatile organic compound (VOC) sealant and also provides a bubble-free seal. Additionally, it can be used for interior or exterior application and delivers a smooth and seamless finish for users.

Thermoplastic architectural one component sealing compound especially formulated to be used outside. GUTTER SEAL is formulated to be used outdoor for sealing PVC (Polyvinyl chloride) and aluminum gutter joints.

Gutter Seal is a one-part, high quality blend of synthetic rubber and resin. It exhibits excellent elastomeric properties while maintaining superior adhesion under ponded water conditions. Gutter Seal has been specifically designed for use in gutter and rain-wear applications and is ideally suited for metal to metal and metal to plastic joinery. Commonly found in and around the eavestrough.

2320^® and 2321 Gutter and Narrow Seam Sealant is a single-component, elastomeric, semi-self-leveling, high performance tripolymer sealant designed to prevent the passage of air and moisture through small joints or seams.

NuFlex 302 Bath & Kitchen (B & K) Silicone Sealant is a 100% medium modulus one-component acetoxy cure, non-sag caulking material. NuFlex 302 B & K is especially formulated to resist mould and mildew when fully cured. NuFlex 302 B & K has excellent adhesion to ceramics, tile board, corian, arborite and most acrylics.

Eco-Sil 301 General Purpose (GP) Silicone Sealant is a 100% RTV, acetoxy sealant designed for multiple uses. It is easily applied and will not sag when used for overhead or sidewall applications. Eco-Sil 301 adheres to many substrates, including metal, glass, most types of wood, ceramics, and many plastics.

Eco-Sil 501 Fast-Cure Glass & Vinyl Silicone Sealant is a one part, 100% silicone sealant that exhibits accelerated development of issts surface elastic properties and provides excellent unprimedadhesion to a wide varieties of substartes including metal, glass, most types of wood, ceramics, and many plastics. It is easily applied and will not sag when used for overhead or sidewall applications

SCS1000 Contractors silicone sealant is a one-component acetoxy silicone material that provides excellent weatherability and elasticity for general purpose sealing and bonding. SCS1000 silicone sealant is a paste material, which cures into a flexible rubber when exposed to atmospheric moisture.

Spec 1 Ultra Low Modulus is formulated for expansion, control, lap joints, and EIFS applications. It also acts as an adhesive used in conjunction with Spectrem Simple Seal. Simple Seal is used as a bridge seal in both new construction and restoration work.

Spec 1 Ultra Low Modulus is formulated for expansion, control, lap joints, and EIFS applications. It also acts as an adhesive used in conjunction with Spectrem Simple Seal. Simple Seal is used as a bridge seal in both new construction and restoration work.

TREMstop Fyre-Sil is a firestop product that also provides protection against washout conditions. When installed in accordance with a tested firestop system, it affords code compliance for both through-penetrations and fire-rated joints.

TREMstop Acrylic is a gunnable acrylic latex sealant designed for use in firestop applications, including both joints and through-penetrations. TREMstop Acrylic is for use on metal pipe, plastic pipe, insulated pipe, cables, cable trays, ducts, static joints and dynamic joints in fire-rated concrete, wood floor/ceiling and gypsum wall assemblies. TREMstop Acrylic can also be used on sound rated assemblies.

NuFlex 456 Heavy Duty Construction Adhesive is a versatile LOW VOC professional strength adhesive that exceeds the APA’s AFG-01 specification. It is designed for a wide range of construction applications including wet, frozen and treated lumber. It is also ideal for metal, brick, concrete, ceramics and most large panel-type substrates.

NuFlex 458 All Weather Subfloor Adhesive is the professional’s choice for subfloor installations and general plywood use. It is ideal for particleboard, OSB and engineered lumber as well as wet, frozen and treated lumber. It offers a strong initial tack, provides superior strength and remains permanently flexible.

ECO Foam is a one-component polyurethane foam used to seal cracks, holes, joints and openings, providing airtight insulation that blocks drafts, moisture and insects. It’s applied with a gun applicator and can be used under the plate line, at the juncture of the plate line and the slab of foundation, and any penetration through the top or the bottom plate line into a conditioned area.

TYTAN EXTREME CLIMATE PRO is an innovative one-component polyurethanegun foam specially formulated for use in extreme temperatures, down to 14 F(-10 C). Excellent for filling, insulating and sealing of gaps, cracks and openings in the interior and exterior of buildings. The ground-breaking formula creates a durable airtight seal, and stops cold air infiltration.

IPF GREEN is a single component polyurethane foam used to seal around windows, doors and unwanted cracks and gaps in a building envelope. It is an excellent air barrier and has natural additive to fend off rodents and insects.

PURfectseal Gun Foam is a single component, moisture curing, low expansion gun foam which has good cold weather gun ability. It is specifically formulated to be ‘O-Zone’ friendly and is extremely economical.

Rivenco X Gun Foam is a single component polyurethane foam used to seal around windows, doors and unwanted cracks and gaps in a building envelope. It is made from an MDl monomer, uses environmentally friendly propellant and contains a fire retardant

IPF ALL WEATHER PRO’” is a single component polyurethane foam used to seal around windows, doors and unwanted cracks and gaps in a building envelope.

POLYURETHANE CLEANER is a multi-purpose cleaning agent used to dissolve uncured or fresh polyurethane foam. Foam cleaner is used for cleaning and lubricating the one component polyurethane foam guns, as well as for general cleaning purposes such as tools and work surfaces.

Touch ‘n Seal two-component, polyurethane foam systems are designed for use in commercial sealing, insulating, patching, and filling applications. The high closed cell content of the cured foam makes it suitable as a general sealant to prevent air leakage in cold storage and other insulating/sealing applications. Two-component polyurethane foam systems provide fast, even foam flow that cures in 45 seconds, making it ideal for vertical applications.

Bulk cylinder systems are ideal for large volume jobs such as sealing under baseboards or insulating sole plates. The system features a 10-ft. hose and wand applicator.

The convenience of disposable foam kits meets the efficiency of bulk systems in the new CPDS 1000 from Eagle Sealants. The CPDS 1000 is a portable, constant pressure spray foam dispensing system that uses compressed air to deliver higher foam yield, up to 2-1/2 times as fast as foam kits.

Available in different widths and lengths.

Available in different widths and lengths.

This tape is made of a UV resistant polypropylene film and coated with high shear, high tack solvent based acrylic adhesive.

*This tape is meant for permanent application only. It will leave adhesive residue if removed.

This tape is made of a UV resistant polypropylene film and coated with high shear, high tack solvent based acrylic adhesive.

*This tape is meant for permanent application only. It will leave adhesive residue if removed.